MIRASEAL X by VULK is a solvent-based siloxane-acrylic resin blend sealer that enhances the natural colour of concrete, masonry, and natural stone materials. An excellent choice for honed concrete, external pavements, exposed architectural concrete, and natural or artificial stone.
Ensure substrate is clean, dust and stain free prior to application. Clean the surface to remove any dirt, laitance, previous coatings or curing agents that may prevent penetration of the material.
The surface must be dry and thoroughly cured prior to application.
It is recommended to undertake a test sample to confirm the suitability of the product for specific substrates and ensure desired results are achieved.
Application Method
Slowly stir the material until thoroughly mixed; Two coats of the product should be applied to achieve a consistent, enhanced appearance with a wet-look. The properties of the substrate such as porosity and profile will greatly influence the number of coats required.
Application may be via solvent resistant low-pressure sprayer fitted with an adjustable spray tip, microfibre mop or natural hair applicator.
Spray apply the product and use a soft, lint-free cloth or microfibre mop to spread any excess product to achieve a thin uniform layer, ensuring no pooling or mop marks. It is important to evenly spread material to prevent inconsistencies in the enhancement. The product must be applied in consecutive coats on the same day once each coat has dried. The applicator pad should be pre-moistened with Miraseal X prior to use.
