Finpro 2k Reducer

Application Instructions

Finseal 2K Thinners is used for thinning VULK Finseal PU HD Polyurethane and Finseal PA Polyapsartic coatings.

Directions for use

Finpro 2K Thinners is a specially formulated solvent based thinner used for viscosit reduction in solvent based coatings Finpro PA and Finpro PU HD. Standard reducer for use in application temperature ranges of 18 – 27˚C APPLICAITON DIRECTIONS Add Finpro 2K Thinners to the freshly mixed Finduro polyurethane or polyaspartic coating system at 5% by volume (10% maximum) to reduce application viscosity. Mix thoroughly using a low-speed mechanical mixer. Apply the coating by roller or squeegee.

Important

Read and follow manufacturer’s directions when thinning coatings. HAZARDS Keep away from all sources of ignition – DO NOT SMOKE. Harmful by inhalation, including contact with skin and if swallowed. Irritating to eyes, respiratory system and skin. Avoid contact with eyes. Avoid contact with skin. Avoid breathing vapour or spray mist. Dispose of contents and container in accordance with all local, regional, national and international regulations.

First Aid

If swallowed DO NOT induce vomiting. Give a glass of water. If poisoning occurs, contact ad doctor or Poisons Information Centre (Ph. 131 123). If skin contact occurs, remove contaminated clothing and wash skin thoroughly. If in eyes, hold eyes open, floor with water for at least 15 minutes and see a doctor if irritation persists.

Danger

This package contains volatile and flammable solvents and when using contents adequate ventilation to the outside must be provided. All potential sources of ignition (open flames, pilot lights, furnaces, spark producing switches, etc.) must be eliminated in, or near the working area.