Description
Aardcure Cure Strip is a specially formulated stripper designed for the removal of hydrocarbon-based resin curing compounds from concrete.
Containing a powerful and effective surfactant blend that has low toxicity, odour and flammability, it is ideal for removal of applied curing compound in situations of low UV exposure and oxidisation, uneven or over application or prior to installing aftertrades to the surface.
Aardcure Cure Strip Uses
- Removal of hydrocarbon resin curing compounds
- Removal of tyre marking on hard surfaces
Application Instructions
Application Method
Assess the application area so that a fixed volume of mixed material can be applied over a fixed area to determine the correct
application rate.
Agitate the material until thoroughly mixed to ensure effective stripping properties.
Effective application temperatures are between 5ºC and 40ºC.
Application is recommended via low pressure spray unit at a rate of 1L/5-7m2 to achieve consistent coverage in even coats.
Allow Aardcure Cure-Strip to dwell on the surface for at least 30-60 minutes (maximum 6 hours).
After the required period remove the emulsified coating off the concrete surface using water by pressure washing (minimum
1100psi) or by using an automated scrubber by laying water down first. Use low abrasion brushes or pads depending on the
surface profile.
Important
Treated surface must by thoroughly flushed with water to remove all residue.
Pressure washing must be undertaken with a suitable tip and at an appropriate angle to avoid concentrated pressure on one area to avoid heavy washouts.
Always do a test patch to confirm the required results are achieved, particularly when using the product for the first time.
