Description
Fincare Strip Solve is thick, solvent-based, high viscosity stripping gel formulated to strip acrylic sealers including vertical or overhead masonry and concrete surfaces.
1 x 20L
Application Instructions
Surface Preparation
Areas to be treated must be clean, dry, free from sawcutting debris.
Application Method
Assess the application area so that a fixed volume can be applied to achieve consistent coverage.
Agitate the material until thoroughly mixed to ensure effective application.
Apply Fincare Strip Solve with natural bristle brush or squeegee or applicator at sufficient rate . If desired coating removal is not achieved, repeat application of Fincare Strip Solve.
Allow Fincare Strip Solve to dwell on the surface until the film changes colour and bubbles.
Remove the contaminant contaminants are removed. Rinse all surfaces thoroughly with clean water, noting to wash vertical surfaces from the top down to avoid re-soiling of cleaned areas.
