Fincare Eco Strip is an all-purpose, low odour, non-methylene chloride-based stripping gel formulated to strip varnish, enamels, acrylic paints, including epoxies and moisture-cure urethanes. This product deeply penetrates to the applied surface for up to 24 hours to fully emulsify the stripped coating allowing water wash off.
1 x 20L
Areas to be treated must be clean, dry, free from sawcutting debris.
Assess the application area so that a fixed volume can be applied to achieve consistent coverage.
Agitate the material until thoroughly mixed to ensure effective application.
Apply Fincare Eco Strip at 1-5mm with natural bristle brush or squeegee or applicator at sufficient rate . If desired coating removal is not achieved, repeat application of Fincare Eco Strip.
Allow Fincare Eco Strip to dwell on the surface for the time required to soften the treated material. Fincare Eco Strip will remain active for up to 24 hours.
Remove the contaminant contaminants are removed. Rinse all surfaces thoroughly with clean water, noting to wash vertical surfaces from the top down to avoid re-soiling of cleaned areas.