Aardcure AGP

Non – sacrificial anti graffiti protection

Order Request


Aardcure AGP is a fluoro-modified silicone agent in a hydrocarbon solvent with unique oleophobic properties that protects substrates from the ingress of oil and waterborne contaminants which is the main cause of staining and discolouration of the surface. Aardcure AGP is an excellent treatment for the easy removal of graffiti and posters and acts as a sealer of concrete, masonry, natural stone surfaces such as unglazed tile, clay paving brick, etc.

1 x 20L

Technical Data Sheet

Colour Chart

Application Instructions

Surface Preparation

Ensure substrate is clean, dust and stain free prior to application. Clean surface to remove any dirt, laitance, previous coatings or curing agents that may prevent penetration of the material.

The surface must be dry prior to application.

It is recommended to undertake a test sample to confirm the suitability of the product for specific substrates and ensure desired results are achieved.

Application Method

Slowly stir the material until thoroughly mixed; Using a low-pressure sprayer fitted with an adjustable spray tip, surface must be flooded at a sufficient rate ensuring to achieve full saturation.

Substrates of greater porosity will benefit from a second application, wet on wet, to ensure penetration is achieved. The properties of the substrate such as porosity and profile will greatly influence the amount of material required.

Related Products